Su G, Liu Z, Li L, et al.Influences of chip serration on micro-topography of machined surface in high-speed cutting[J]. International Journal of Machine Tools and Manufacture, 2015, 89: 202-207.
Yang D, Liu Z. Surface plastic deformation and surface topography prediction in peripheral milling with variable pitch end mill[J]. International Journal of Machine Tools and Manufacture, 2015, 91: 43-53.
Zhang P, Liu Z. Effect of sequential turning and burnishing on the surface integrity of Cr–Ni-based stainless steel formed by laser cladding process[J]. Surface and Coatings Technology, 2015, 276: 327-335.
Wang B, Liu Z, Su G, et al.Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra-high speed machining[J]. International Journal of Mechanical Sciences, 2015, 104: 44-59.
Cai Y, Liu Z, Song Q, et al.Fluid mechanics of internal flow with friction and cutting strategies for micronozzles[J]. International Journal of Mechanical Sciences, 2015, 100: 41-49.
Yang D, Liu Z. Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti–6Al–4V[J]. International Journal of Refractory Metals and Hard Materials, 2015, 51: 192-200.
Zhang T, Liu Z, Xu C. Theoretical modeling and experimental validation of specific cutting force for micro end milling[J]. The International Journal of Advanced Manufacturing Technology, 2015, 77(5-8): 1433-1441.
Zhenyu S, Luning L, Zhanqiang L. Influence of dynamic effects on surface roughness for face milling process[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(9-12): 1823-1831.
Cai Y, Liu Z, Shi Z, et al.Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness[J]. The International Journal of Advanced Manufacturing Technology, 2015, 80(5-8): 1403-1410.
Wang B, Liu Z. Shear localization sensitivity analysis for Johnson–Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V[J]. Simulation Modelling Practice and Theory, 2015, 55: 63-76.
Cai Y, Liu Z, Shi Z, et al.Residual surface topology modeling and simulation analysis for micro-machined nozzle[J]. International Journal of Precision Engineering and Manufacturing, 2015, 16(1): 157-162.
Wang B, Liu Z, Su G, et al.Brittle Removal Mechanism of Ductile Materials With Ultrahigh-Speed Machining[J]. Journal of Manufacturing Science and Engineering, 2015, 137(6): 061002.
Zhang K, Liu Z, Wan Y, et al. Fluid-Like Properties of Chip Flow in High-Speed Metal Cutting Process[J]. Machining Science and Technology, 2015, 19(1): 71-85.
Ai X, Liu J. Plastic flow modeling of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy at elevated temperatures and high strain rates[J]. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30(3): 611-616.
Zhang J, Liu Z, Du J. Modelling and prediction of tool-chip interface temperature in hard machining of H13 steel with PVD coated tools[J]. International Journal of Machining and Machinability of Materials, 2015, 17(5): 381-396.
Jian Z, Zhanqiang L. Analysis and optimization of surface roughness in rotary ultrasonic burnishing of titanium alloy Ti-6Al-4V[J]. Advanced Materials Research, 2015, 806.
Zhang K, Deng J, Xing Y, et al. Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions[J]. Applied Surface Science, 2015, 326: 107-118.
Zhang K, Deng J, Sun J, et al.Effect of micro/nano-scale textures on anti-adhesive wear properties of WC/Co-based TiAlN coated tools in AISI 316 austenitic stainless steel cutting[J]. Applied Surface Science, 2015, 355: 602-614.
Xing Y, Deng J, Zhang K, et al.Fabrication and dry cutting performance of Si 3 N 4/TiC ceramic tools reinforced with the PVD WS 2/Zr soft-coatings[J]. Ceramics International, 2015, 41(8): 10261-10271.
Zhang K, Deng J, Meng R, et al. Effect of nano-scale textures on cutting performance of WC/Co-based Ti 55 Al 45 N coated tools in dry cutting[J]. International Journal of Refractory Metals and Hard Materials, 2015, 51: 35-49.